| Peer-Reviewed

Application of Explosives in the Oil Industry

Received: 17 July 2013     Published: 20 August 2013
Views:       Downloads:
Abstract

The 20th century was largely dependent upon fossil fuel, in particular petroleum. The petroleum industry provides fuel and other compounds for modern society, ranging from natural gas, passing through diesel and culminating with polymers. These polymers are seeing in every aspect of modern life (books, computers, cars, foams, cloves, and so on). Due to this dependency, modern society would collapse without petroleum derivatives. The main source for raw petroleum rests in the deep sea, where the oil is imbedded in the rocks under the sea. The location of petroleum reservoirs and implementing the extraction facility requires large amounts of explosives. Due to the complexity of the subject, this paper presents the set of explosive applica-tions in the oil industry, discussing applications and which explosives are used in each and every one of these applications. The main contribution of this paper is to provide easiness on finding general information regarding explosives in the oil industry, as well as provide solid ground and background information for other studies.

Published in International Journal of Oil, Gas and Coal Engineering (Volume 1, Issue 2)
DOI 10.11648/j.ogce.20130102.11
Page(s) 16-22
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2013. Published by Science Publishing Group

Keywords

Explosives, Oil Industry, Perforation Charges, Review

References
[1] J. Akhavan, The Chemistry of Explosives, Third Edit. Norfolk: Biddles Ltd., Kings Lynn, Norfolk, 2011.
[2] P. Cooper, Explosives Engineering. Wiley-VCH, Inc. United States of America, 1996.
[3] K. Kuo, Principles of combustion, 2nd ed. John Wiley & Sons, 2005.
[4] R. Meyer, J. Köhler, and A. Homburg, Explosives, 6th, Compl. Weinheim: Wiley-VCH Verlag GmbH, Weinheim, 2007.
[5] department of Defense, Risk-Based Explosives Safety Analysis, no. 14. Alexandria, Virginia: Explosives Safety Board, 2000.
[6] J.-C. Martin, Incendies et Explosions D’Atmosphère, Première. Presses Polytechniques et Universitaires romandes, 2008, p. 574.
[7] H. PennWell, "OIL & GAS JOURNAL," Worldwide look at reserves and production, 2010. [Online]. Available: http://www.ogj.com. [Accessed: 01-Feb-2010].
[8] ANP, "Year book for statistics regarding Petroil and Gas production in Brazil - Anuário Estatístico Brasileiro Do Petróleo, Gás Natural E Biocombustíveis," Rio de Janeiro, Brazil, 2011.
[9] M. Khandelwal and T. N. Singh, "Prediction of blast-induced ground vibration using artificial neural network," International Journal of Rock Mechanics and Mining Sciences, vol. 46, no. 7, pp. 1214–1222, Oct. 2009.
[10] M. Khandelwal and T. N. Singh, "Evaluation of blast-induced ground vibration predictors," Soil Dynamics and Earthquake Engineering, vol. 27, no. 2, pp. 116–125, Feb. 2007.
[11] M. Khandelwal and T. N. Singh, "Prediction of blast induced ground vibrations and frequency in opencast mine: A neural network approach," Journal of Sound and Vibration, vol. 289, no. 4–5, pp. 711–725, Feb. 2006.
[12] W. J. Lukasavage and N. Slagg, "Process for preparation of RDX," Patent number US5250687, International Classification: C07D251061993.
[13] J. A. Meredith, "Preparation of RDX," Patent number US3937703. International Classification C07D25154.1976.
[14] C. P. Achuthan and G. Mullick, "HAZARDS IN THE MANUFACTURE OF RDX AND HMX," Defence Science Journal, vol. 33, no. 1, pp. 91–95, 1983.
[15] W. E. Bachmann and J. C. Sheehan, "A new method of preparing the high explosive RDX," Journal of the American Chemical Society, vol. 71, no. 5, pp. 1842–1845, 1949.
[16] J. T. Leach and J. M. Staples, "Hazards of inadvertent mixing of chemicals used in the Bachmann processes for manufacturing the military explosives RDX and HMX," Journal of Hazardous Materials, vol. 4, no. 3, pp. 271–281, Jan. 1981.
[17] IMBEL, "IMBEL," 2013. [Online]. Available: www.imbel.gov.br. [Accessed: 17-Jul-2013].
[18] P. Shah, H. Pandya, H. Sharma, and A. Saxena, "Offshore Drilling & Well Testing of a HPHT Gas Well: A Case Study," in Proceedings of SPE Oil and Gas India Conference and Exhibition, 2012.
[19] J. Panjwani, N. Kothari, S. Pooniwala, and M. Mahajan, "Application of Sand Jet Perforations for Multizone Fracturing in CBM Wells, India," in Proceedings of 2013 SPE/ICoTA Coiled Tubing & Well Intervention Conference & Exhibition, 2013.
[20] K. K. Millheim, "Advances in Drilling Technology and Where Drilling Technology Is Heading," in Proceedings of International Meeting on Petroleum Engineering, 1986.
[21] W. Davila, A. Azizov, G. Han, and E. Magnuson, "Practical Directional Drilling Techniques and MWD Technology in Bakken and Upper Three Forks Formations in Williston Basin North Dakota to Improve Efficiency of Drilling and Well Productivity," in Proceedings of 2013 SPE Middle East Unconventional Gas Conference & Exhibition, 2013.
[22] J. Hasling, "Impacts of Technology on Communicating Weather Windows for Offshore Construction, Drilling and Intervention Operations," in Proceedings of 2013 Offshore Technology Conference, 2013.
[23] A. Buntoro, "Casing Drilling Technology as the Alternative of Drilling Efficiency," in Proceedings of IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, 2008.
[24] H. Williams, L. Anbao, F. Zhang, P. Jianxin, C. Baumann, Y. Xiangtong, and K. Barnard, "Prediction and Reduction of Perforating Gunshock Loads," in Proceedings of 6th International Petroleum Technology Conference, 2013.
[25] C. Baumann, E. Pesantes, J. Guerra, A. William, and H. Williams, "Reduction of Perforating Gunshock Loads," SPE Drilling & Completion, vol. 27, no. 1, Mar. 2012.
[26] C. Baumann, M. Benavides, A. Martin, A. Salsman, and H. Williams, "Perforating on Wireline - Weak-Point Load Prediction," in Proceedings of SPE/EAGE European Unconventional Resources Conference and Exhibition, 2012.
[27] P. Valdivia, H. Williams, P. Stecchini, A. Pando, and C. Baumann, "Perforating Gunshock Loads - Prediction and Mitigation," in Proceedings of 2013 SPE / IADC Drilling Conference and Exhibition, 2013.
[28] D. Atwood, W. Yang, B. Grove, and L. Behrmann, "Flow Performance of Perforation Tunnels Created With Shaped Charges Using Reactive Liner Technology," in Proceedings of 8th European Formation Damage Conference, 2009.
[29] British Geological Survey, "British Geological Survey," 2013, 2013. [Online]. Available: http://www.bgs.ac.uk/research/energy/undergroundGasStorage.html. [Accessed: 17-Jul-2013].
[30] K. Dey and V. M. S. R. Murthy, "Prediction of blast-induced overbreak from uncontrolled burn-cut blasting in tunnels driven through medium rock class," Tunnelling and Underground Space Technology, vol. 28, pp. 49–56, Mar. 2012.
[31] France, "Eurenco Group," 2013. [Online]. Available: http://www.eurenco.com/en/explosives/high_explosives.html. [Accessed: 17-Jul-2013].
[32] Vieira, "Perforation Charges in Petroil - CANHONEIO EM POÇOS PETROLÍFEROS," 2011.
[33] G. Birkhoff, D. P. MacDougall, E. M. Pugh, and S. G. Taylor, "Explosives with Lined Cavities," Journal of Applied Physics, vol. 19, no. 6, p. 563, 1948.
[34] F. Yang, C. Li, S. Cheng, L. Wang, and W. Tian, "Deformation behavior of explosive detonation in electroformed nickel liner of shaped charge with nano-sized grains," Transactions of Nonferrous Metals Society of China, vol. 20, no. 8, pp. 1397–1402, Aug. 2010.
[35] R. M. Lloyd, Conventional Warhead Systems Physics and Engineering Designs. Universidade de Michigan: Progress in Astronautics and Aeronautics, 1998, p. 636.
[36] W. P. Walters and J. A. Zukas, Fundamentals of shaped charges, 1st ed. Universidade de Michigan: Wiley-VCH, Inc. United States of America, 1989, p. 398.
[37] H. W.C. and W. R. Shu, "Controlled Pulse Fracturing for Well Stimulation," in Proceedings of Low Permeability Reservoirs Symposium, 1989.
Cite This Article
  • APA Style

    Erick Galante, Assed Haddad, Nathália Marques. (2013). Application of Explosives in the Oil Industry. International Journal of Oil, Gas and Coal Engineering, 1(2), 16-22. https://doi.org/10.11648/j.ogce.20130102.11

    Copy | Download

    ACS Style

    Erick Galante; Assed Haddad; Nathália Marques. Application of Explosives in the Oil Industry. Int. J. Oil Gas Coal Eng. 2013, 1(2), 16-22. doi: 10.11648/j.ogce.20130102.11

    Copy | Download

    AMA Style

    Erick Galante, Assed Haddad, Nathália Marques. Application of Explosives in the Oil Industry. Int J Oil Gas Coal Eng. 2013;1(2):16-22. doi: 10.11648/j.ogce.20130102.11

    Copy | Download

  • @article{10.11648/j.ogce.20130102.11,
      author = {Erick Galante and Assed Haddad and Nathália Marques},
      title = {Application of Explosives in the Oil Industry},
      journal = {International Journal of Oil, Gas and Coal Engineering},
      volume = {1},
      number = {2},
      pages = {16-22},
      doi = {10.11648/j.ogce.20130102.11},
      url = {https://doi.org/10.11648/j.ogce.20130102.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ogce.20130102.11},
      abstract = {The 20th century was largely dependent upon fossil fuel, in particular petroleum. The petroleum industry provides fuel and other compounds for modern society, ranging from natural gas, passing through diesel and culminating with polymers. These polymers are seeing in every aspect of modern life (books, computers, cars, foams, cloves, and so on). Due to this dependency, modern society would collapse without petroleum derivatives. The main source for raw petroleum rests in the deep sea, where the oil is imbedded in the rocks under the sea. The location of petroleum reservoirs and implementing the extraction facility requires large amounts of explosives. Due to the complexity of the subject, this paper presents the set of explosive applica-tions in the oil industry, discussing applications and which explosives are used in each and every one of these applications. The main contribution of this paper is to provide easiness on finding general information regarding explosives in the oil industry, as well as provide solid ground and background information for other studies.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Application of Explosives in the Oil Industry
    AU  - Erick Galante
    AU  - Assed Haddad
    AU  - Nathália Marques
    Y1  - 2013/08/20
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ogce.20130102.11
    DO  - 10.11648/j.ogce.20130102.11
    T2  - International Journal of Oil, Gas and Coal Engineering
    JF  - International Journal of Oil, Gas and Coal Engineering
    JO  - International Journal of Oil, Gas and Coal Engineering
    SP  - 16
    EP  - 22
    PB  - Science Publishing Group
    SN  - 2376-7677
    UR  - https://doi.org/10.11648/j.ogce.20130102.11
    AB  - The 20th century was largely dependent upon fossil fuel, in particular petroleum. The petroleum industry provides fuel and other compounds for modern society, ranging from natural gas, passing through diesel and culminating with polymers. These polymers are seeing in every aspect of modern life (books, computers, cars, foams, cloves, and so on). Due to this dependency, modern society would collapse without petroleum derivatives. The main source for raw petroleum rests in the deep sea, where the oil is imbedded in the rocks under the sea. The location of petroleum reservoirs and implementing the extraction facility requires large amounts of explosives. Due to the complexity of the subject, this paper presents the set of explosive applica-tions in the oil industry, discussing applications and which explosives are used in each and every one of these applications. The main contribution of this paper is to provide easiness on finding general information regarding explosives in the oil industry, as well as provide solid ground and background information for other studies.
    VL  - 1
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Instituto Militar de Engenharia, IME, Rio de Janeiro, Brazil

  • niversidade federal do Rio de Janeiro, UFRJ, Rio de Janeiro, Brazil

  • BW OffShore, Rio de Janeiro, Brazil

  • Sections